Address
Kaiyzer (haftungsbeschränkt) Johannesstraße 45 73614 Schorndorf Deutschland
Work Hours
Montag bis Freitag: 7AM - 7PM
Wochenende: 10AM - 5PM
Power chuck TOPlus
Power chuck TOPlus
Six to win
- 25 % higher holding power than SPANNTOP
- Unequalled rigidity due to full-surface contact of the clamping segments
- Superior resistance to contamination because of the clamping head geometry
- Absorbs vibration
- Optimal lubrication thanks to lubricating grooves in the clamping head reception
- Minimal inertia loss compared to 3-jaw chucks
Variants
Combi pull-back
Workpiece clamping with pull-back effect. Chuck with dismountable endstop plate. Without end-stop plate ideal for machining pipes and bars.
Advantages
- Workpiece stabilization through axial draw force applied against the workpiece end-stop
- Prepared for inside and front end-stop
- Converts to a fully functional »bar chuck« when the end-stop plate is removed
Combi deadlength
Workpiece clamping without pull-back effect. Chuck with dismountable endstop plate. It is also frequently used on the sub spindle.
Advantages
- Workpiece clamping without axial movement of the clamping head
- Clamps workpieces with a short collar or shoulder
- Suitable for pick-off without pullback effect
- Prepared for inside and front end-stop
- Converts to a fully functional »bar chuck« when the end-stop plate is removed
Modular
Through-bore chuck only – ideal for machining pipes and bars.
Advantages
- Fully-functional bar chuck
- Due to pull-back effect significantly more rigid clamping is achieved than by conventional collets
- Higher RPM and metal removal rates for bar work
